My contact person
Hitech UAB

Terminalo g. 3

54469 / Biruliskiu k. Kauno raj.

+370 37 323271
+370 37 203273

Electric motors

Cost-effective and scalable motors for linear axes, linear robots and delta robots
The portfolio of igus® includes stepper motors in several sizes, extendable with encoders and brakes, cost-effective and quiet DC motors, which can also be operated via battery without complex external power electronics, and EC motors for fast, powerful movements. Gearboxes that reduce the output speed and thus increase the available drive torque.
The motors are used, among other things, in packaging and inspection technology, for example in sensor and camera travel - also in the food sector, outdoors and areas exposed to splashes and water spray.
 

Products

Filter

Size
Electrical information
Fitting
System
Design

Number of products: 35

drylin® E stepper motor with connector, encoder and brake, NEMA 17
  • Installation size: NEMA17/flange installation size 42mm
  • Protection class motor housing: IP65 (Shaft seal IP52)
  • Holding torque: 0.5Nm
  • Nominal current: 1.8A
  • Motor connection: Metric connector

from 624.26 USD/Pc.

 
Delivery time on request
To the product page
drylin® E stepper motor with connector, NEMA 23
  • Installation size: NEMA23/flange installation size 56mm
  • Protection class motor housing: IP65 (Shaft seal IP52)
  • Holding torque: 2.00Nm
  • Nominal current: 4.20A
  • Motor connection: Metric connector

from 140.10 USD/Pc.

 
Delivery time on request
To the product page
drylin® E special stepper motor with terminal box and encoder, water protection, NEMA 23
  • Installation size: NEMA23/flange installation size 56mm
  • Protection class motor housing: IP68 (10 m)
  • Holding torque: 1.30Nm
  • Nominal current: 4.20A
  • Motor connection: terminal box

from 872.81 USD/Pc.

 
Delivery time on request
To the product page
drylin® E stepper motor with connector, NEMA 23XL
  • Installation size: NEMA23XL/flange dimension 60 mm
  • Protection class motor housing: IP65 (Shaft seal IP52)
  • Holding torque: 3.50Nm
  • Nominal current: 4.20A
  • Motor connection: Metric connector

from 218.91 USD/Pc.

 
Delivery time on request
To the product page
drylin® E stepper motor with connector, encoder and brake, NEMA 34
  • Installation size: NEMA34/flange installation size 86mm
  • Protection class motor housing: IP65 (Shaft seal IP52)
  • Holding torque: 5.90Nm
  • Nominal current: 6.40A
  • Motor connection: Metric connector

from 711.31 USD/Pc.

 
Delivery time on request
To the product page
drylin® E lead screw stepper motor with strands and encoder, NEMA 11
  • Installation size: NEMA11/flange installation size 28mm
  • Protection class motor housing: IP40
  • Holding torque: 0.12Nm
  • Nominal current: 1.00A
  • Motor connection: strands and encoder, JST connector

from 173.03 USD/Pc.

 
Delivery time on request
To the product page
drylin® E lead screw stepper motor with strands, NEMA 17
  • Installation size: NEMA17/flange installation size 42mm
  • Protection class motor housing: IP40 
  • Holding torque: 0.50Nm
  • Nominal current: 1.80A
  • Moto connection: Strand with JST connector

from 79.14 USD/Pc.

 
Delivery time on request
To the product page
drylin® E stepper motor with stranded wire, NEMA 11
  • Installation size: NEMA11/flange installation size 28mm
  • Protection class motor housing: motor with stranded wires IP40 (shaft seal IP52)
  • Holding torque: 0.12Nm
  • Nominal current: 1.00A
  • Motor connection: strands and encoder, JST connector

Upon request

 
Delivery time on request
To the product page
drylin® E stepper motor with stranded wire and encoder, NEMA 11
  • Installation size: NEMA11/flange installation size 28mm
  • Protection class motor housing: motor with stranded wires IP40 (shaft seal IP52)
  • Holding torque: 0.12Nm
  • Nominal current: 1.00A
  • Motor connection: metric connector

Upon request

 
Delivery time on request
To the product page
drylin® E lead screw stepper motor with strands, NEMA 23, short type
  • Installation size: NEMA23/flange installation size 56mm
  • Protection class motor housing: IP40 
  • Holding torque: 1.00Nm
  • Nominal current: 2.8 A
  • Motor connection: strand with JST connector

from 144.58 USD/Pc.

 
Delivery time on request
To the product page
drylin® E stepper motor with connector, NEMA 17
  • Installation size: NEMA17/flange installation size 42mm
  • Protection class motor housing: IP65 (Shaft seal IP52)
  • Holding torque: 0.50Nm
  • Nominal current: 1.80A
  • Motor connection: metric connector

from 115.19 USD/Pc.

 
Delivery time on request
To the product page
drylin® E stepper motor with stranded wire, NEMA 17
  • Installation size: NEMA17/flange installation size 42mm
  • Protection class motor housing: IP65 (shaft seal IP52), motor with stranded wires IP40
  • Holding torque: 0.5Nm
  • Nominal current: 1.80A
  • Motor connection:  stranded wires

from 44.35 USD/Pc.

 
Delivery time on request
To the product page
drylin® E stepper motor with connector and encoder, NEMA 17
  • Installation size: NEMA17/flange installation size 42mm
  • Protection class motor housing: IP65 (Shaft seal IP52)
  • Holding torque: 0.50Nm
  • Nominal current: 1.80A
  • Motor connection: Metric connector

from 219.69 USD/Pc.

 
Delivery time on request
To the product page
drylin® E stepper motor with connector and encoder, NEMA 23XL
  • Installation size: NEMA23XL/flange dimension 60 mm
  • Protection class motor housing: IP65 (Shaft seal IP52)
  • Holding torque: 3.50Nm
  • Nominal current: 4.20A
  • Motor connection: Metric connector

from 341.01 USD/Pc.

 
Delivery time on request
To the product page
drylin® E stepper motor with connector, encoder and brake, NEMA 23XL
  • Installation size: NEMA23XL/flange dimension 60 mm
  • Protection class motor housing: IP65 (Shaft seal IP52)
  • Holding torque: 3.50Nm
  • Nominal current: 4.20A
  • Motor connection: Metric connector

from 613.50 USD/Pc.

 
Delivery time on request
To the product page