dryve motor control system - connect, select,
control ...
Precise positioning, endless movements, continuous end-to-end movements - simply defined with the new control system for drylin® E linear systems from igus®.
·
No software or app installations required
·
Quick initial operation
·
Compatible with numerous industrial control systems (e.g. Siemens S7/Beckhoff)
·
For stepper motors
·
Cost-effective
Ready to use immediately
The dryve motor control system can be adapted to your needs
with just a few settings of a dip switch.
In this way, all necessary settings can be made in one minute.
Accurate positioning - Pulse mode
Pulse can be used to perform accurate positioning. With this, each step of the motor can be subdivided into another 128 partial movements
The path planning and output of the clock frequency are taken by a higher-level control system.
Easy motion control system - JOG or LOOP mode
If movements need be carried out at a predefined speed
with the "push of a button", it can be implemented with jog mode.
On the other hand, if a continuous movement with a predefined speed between two end positions is to be carried out, then the loop mode can be used for this.
Strong engineering
The high supply voltage of up to 48V ensures
high motor speeds. The nominal current of 7A
matched to the motor and the high peak current of 9.8A result in
powerful and dynamic movements.
