Bearings and energy chains for commercial vehicles

Heavy loads, dirt, heat, low temperatures and humidity: Commercial vehicles and lorries have a rough working day. No tradesperson can afford downtime, and usually the tight schedules do not allow time for maintenance. Energy chains, plain bearings and linear guides made of iglidur plastics help you increase reliability in and around the vehicle at many fault-prone places. The products are characterised by a high level of robustness, predictable operating times and the fact that they do not require lubrication. No lubricants also means no dirt contained in the grease that limits mobility.

What will you find on this page?

Areas of application ▼
White paper: PFAS in focus ▼
Our 6 top products for commercial vehicles ▼
Success stories ▼
Roadshow at your site ▼
Further information ▼

Areas of application

Which product at which installation point?

Whether on the wing mirror, in the tilt mechanism of the cab or on the steering linkage: The requirements for bearing vary depending on where they are used on and in the lorry. We will show you which product is the right one for which application.

Application locations in lorries

Boarding systems, pantographs, wheelchair ramps, passenger seats: Our bearings and energy supply systems are used in these and other areas of buses. Here you will find our product recommendations for the respective area of application.

Application locations in buses

White paper

PFAS in focus: planned restrictions, challenges and solutions for the industry

What exactly are PFAS, why are they so popular in the consumer sector and in industry, especially in the automotive sector? Why is there a threat of an EU-wide ban and what can companies do now?
The white paper sheds light on these questions and shows how igus, as a plastics processor, is responding to the planned restriction at an early stage and can offer its customers PTFE-free and PFAS-tested alternatives.

Download now

Our top products for commercial vehicles

Cable reel e-spool flex without slip ring

Efficient energy supply for your trailer

No sliding contacts. No corrosion. No loss of conductivity.
Extension length of up to 15m
Space-saving, universal use
Easy replacement of the cable used, which makes it customisable

Discover the different versions of e-spool flex now

Extra-strong heavy-duty bearings for up to 180MPa dynamic

Can be found in tail lifts or leaf suspensions, for example

Extremely resilient and high running performance when subjected to pulsating or point loads up to 140 MPa dynamic: igutexTX1
Extremely resilient for particularly high running performance when combined with pulsating or intermittent loads of up to 180MPa dynamic: igutex TX3
Wear-resistant on challenging glide surfaces such as HR carbon steel or 40Cr when subjected to pulsating or intermittent loads of up to 75MPa: iglidur W300E
Very wear-resistant when combined with pulsating or intermittent loads of up to 75MPa: iglidur Q3E

drylin W linear guides

For precise display adjustments

Quiet operation
Self-lubricating
Dirt-resistant and corrosion-free

Find out more about drylin W

Micro-energy chain

E.g. for the guidance of sliding delivery van doors

For the smallest installation spaces with the smallest internal heights
Lightweight and stable
Easy to install and open

Find out more about the E2 micro series

dryspin lead screw technology

E.g. in the variable front spoiler

Excellent emergency running properties
Integrated solid lubricants
No maintenance or lubrication

More about dryspin lead screw technology

igubal coupling joints

E.g. in gearboxes

Lighter than metal bearings
Wear-resistant and vibration-dampening
Economical and without lubrication

More information about igubal coupling joints

Success stories

Extra-strong plain bearings in swing axles for semi-trailers

Lubrication saved, production and maintenance costs reduced: Demarko was looking for durable plain bearings and thrust washers for the swing axles on its heavy-duty semi-trailers, with which maintenance costs could be reduced to a minimum. The solution: igus bearings made of the materials iglidur G and igutex TX1.

Find out more about this application

Bearing points on tail lifts without rust and maintenance

MBB Palfinger relies on iglidur Q290 bearings in the twelve bearing points of the hoists for its tail lifts for ambulances. The corrosion-resistant, durable material significantly reduces the risk of failure of the tail lifts. Poor lubrication and corrosion were a problem with the previously used metal bearings.

Learn more about this application

Overview of applications in utility vehicles

Roadshow at your site

Order our mobile trade show stand to come to your company premises

and benefit from the advantages:

Employees from all departments can find out for themselves
You save travelling costs for trade show visits
Complete time independence on the day of the roadshow: You come when it suits you best
Everything is possible, from individual application advice to a general presentation of new products

Make a request now

More information

Testedin the laboratory

iglidur plain bearings, drylin linear technology and igubal coupling joints are tested for real use in the largest plastics test laboratory in the industry. The focus is on testing assemblies and examining the tribological properties of different material combinations. The results are integrated into our online service life calculation tools and enable precise durability predictions.

igus also performs customer tests on request to check the use of the products under specific conditions.

More about the igus test laboratory